Product List

(Total 97 Products )
Swivel Face Brace
Provides face bracing on access scaffolding. Each brace has swivelling blade ends to allow for easy location within the node joint.
FOB Price: US $1.58 / Piece
Min. Order: 100 Pieces
Inside Board Transom
Drop into place over the ledgers and are secured with a locking device to prevent movement. Act as conventional transoms but extend beyond the inside ledger ...
FOB Price: US $1.35 / Piece
Min. Order: 500 Pieces
Ladder Bracket
Used to secure the ladders at the bottom of the scaffolding. Attaches to ladder at 1.5m intervals. Fits both standard ladder assemblies and system ladders.
FOB Price: US $5.5 / Piece
Min. Order: 100 Pieces
DIN 5686 Double Loop Chain
Made of Q195 or Q235 Carbon steel with electrogalvanized or hot dip galvanized finish
Made of 304 or 316 Stainless steel with long service life
Widely ...
FOB Price: US $5 / Meter
Min. Order: 1,000 Meters
Single Jack Chain
Single Loop Chain is made of thin wire composed of figure eight shaped links looped between one another at 90 degree angles. Single loop chain is widely used as ...
FOB Price: US $5 / Meter
Min. Order: 1,000 Meters
Cuplock is a kind of multi-purpose and versatile modular system scaffolding, suitable for access and formwork support in all types of construction of building & civil engineering ...
FOB Price: US $1.65 / kgs
Min. Order: 1,000 Pieces
Mason Frame with Drop Lock
1.69"OD Tube Diameter X 0.095" Wall Thickness Holes Drilled at 45° Powder Coated in red, other colours are available
FOB Price: US $1.15 / Piece
Min. Order: 500 Pieces
Walkthru Frame with Drop Lock
1.69" OD tube diameter x 0.095" Wall Thickness Powder coated in red or other colours avaible
FOB Price: US $1.15 / Piece
Min. Order: 500 Pieces
Canada Mason Frame
Canadian Style Mason Frame is a kind of ladder frame with sliding lock system.
Made of Q345 low carbon alloy structural steel.
Powder coated, hot dip ...
FOB Price: US $1.25 / Piece
Min. Order: 500 Pieces
Standards
The Standard is the vertical member of the scaffold with a spigot at one end for accurate alignment. A series of ′V′ locating lugs are welded on the tube for the ...
FOB Price: US $1.25 / Piece
Min. Order: 500 Pieces
Ledgers
The Ledger is used to connect the standard in a longitudinal direction. It is made from scaffolding tube with wedge ′Banana Type′ fixing at each end which fits in the ′V′ ...
FOB Price: US $1.25 / Piece
Min. Order: 500 Pieces
Steel Batten
The Steel platform batten spans between the transoms giving a non-slip level surface.
Made of Q235 low carbon structural steel with hot dip galvanized finish or ...
FOB Price: US $1.15 / Piece
Min. Order: 500 Pieces
Transom
Transom is either made of back-to-back angle bar or T-shaped profile with the same fixing device on each end as the ledger. They are used to carry 3 or 5 numbers of steel ...
FOB Price: US $1.25 / Piece
Min. Order: 500 Pieces
Diagonal Brace
The Diagonal Brace is used to the full height of the scaffolding in a longitudinal direction.

Other sizes are available on request.
FOB Price: US $1.25 / Piece
Min. Order: 500 Pieces
Hop Up Bracket
To extend the scaffolding by contilevering for an additional 1, 2 or 3 board platform.

















FOB Price: US $1.15 / Piece
Min. Order: 200 Pieces
Ladder Transom
Used to secure the ladder to the kwikstage scaffolding.

Other sizes are available on request.
FOB Price: US $1.35 / Piece
Min. Order: 200 Pieces
Ladder Beam
Used to span between long distance vertical standards.
FOB Price: US $1.35 / Piece
Min. Order: 200 Pieces
Putlog Coupler
Putlog with forged cover, used for connection of putlogs and transoms with ledgers.
FOB Price: US $0.88 / Piece
Min. Order: 1,000 Pieces
Shoring Frame
Shoring Frame Scaffolding used in some construction projects with high loading requirement. Candy Cane Lock, Flip Lock or other type lock available. Powder coated ...
FOB Price: US $1.25 / Piece
Min. Order: 500 Pieces
Angle Iron Cross Brace
Shoring Angle Iron Cross Brace used to connect with two shoring frames.
FOB Price: US $1.15 / Piece
Min. Order: 1,000 Pieces
Steel Cone
Steel Cone with Check-lever D15 plate with extra-wide base Allowing loading capacity 90KN
FOB Price: US $1.25 / Piece
Min. Order: 1,000 Pieces
Wing Nut
With two wings easy to rotate Used with tie rod or dywidag D15 Nodular Cast iron, electrogalvanized
FOB Price: US $1.25 / kgs
Min. Order: 1,000 Pieces
Base Collar
Connects vertical standards to screw jacks and provides base rosette for ledgers and braces.
FOB Price: US $3.15 / Piece
Min. Order: 440 Pieces
Screw Jack
Screw Jack allows for 450mm adjustment, used to level and increase the height of scaffoldings. The Screw Jack is made of high tensile Strength seamless steel tube with ...
FOB Price: US $4.5 / Piece
Min. Order: 300 Pieces
Scaffold Rack
Used to pack scaffolding components, easy to deliver scaffolding products. Powder coated, hot dip galvanized or painted available.
FOB Price: US $60 / Piece
Min. Order: 10 Pieces
Cross Head Jack
Used with H20 Wooden Beam, LVL Beams or Aluminum I Beams Could be used in Slab Formwork, tunnel construction, etc.
FOB Price: US $3 / Piece
Min. Order: 1,000 Pieces
U Head Jack
Used in slab formwork system to support H20 wooden beams or Aluminum beams.
FOB Price: US $6.9 / Piece
Min. Order: 100 Pieces
Gin Wheel
12" Aluminum Hoist Pulley & Pulley Wheel Set with Hoist Bracket & Arm lifting lowering Heavy duty forged swivel hook with safety clip, hoist pulley wheel with safety ...
FOB Price: US $21.9 / Piece
Min. Order: 50 Pieces

Last Login Date: May 24, 2017

Business Type: Manufacturer/Factory

Main Products: Scaffolding, Formwork Accessories, Shoring Frame Scaffolding, Ringlock Scaffolding, Cuplock Scaffolding, Kwkstage Scaffolding, Frame Scaffolding, Steel Props, Casted Products, Steel Chains